ThingseeWiki

Thingsee IoT Platform Technical Documentation

User Tools

Site Tools


firmware:thingseeenvironment_2019.04.23.1_ts_pod3wp34

2019.04.23.1_ts_pod3wp34

What's new

  • Heartbeat functionality for connectivity and mesh-network diagnostics and reporting
  • Support for leakage-mode where the sensor is attached to a leakage case and reports water-leakage events

Default functionality

  • report a temperature value every 1 minute
  • report a humidity value every 1 minute
  • report an ambient light value every 1 minute
  • report an air pressure value every 1 minute
  • report x,y, z-axis gravity values every 1 minute
  • report battery-level information every 6 hours
  • report a count of changes in magnetic switch every 1 minute

Thingsee Messages

Following Thingsee Message profiles are used

  • Thingsee Message common profile (1)
    • 1100 Thing system info data
    • 1101 Thing information request
    • 1102 Thing information unavailable response
    • 1110 Thing battery info data
    • 1111 Thing orientation info
    • 1202 Sensor network neighbouring data
    • 1312 Firmware binary version info
    • 1403 Error info
    • 1500 Sensor Application Interval Configuration
    • 1501 Sensor Wirepas Node Role Configuration
  • Thingsee Message environment measurement profile (12)
    • 12100 Environment values
    • 12101 Magneto sensor status
  • Thingsee Message machine-usage-monitor profile (16)
    • 16100 vibration data

Example data as received from Thingsee Operations Cloud

Magneto-sensor status

[{
    "tsmId"        : 12100,
    "tsmEv"        : 10,
    "tsmTs"        : 1492603998,
    "tsmTuid"      : "TSTF02S3R1AL",
    "tsmGw"        : "TSGW1234",
    "temp"         : 22.3,
    "humd"         : 56,
    "airp"         : 101456.34,     
    "lght"         : 76
}]

Magneto-sensor status

[{
    "tsmId"        : 12101,
    "tsmEv"        : 10,
    "tsmTs"        : 1492603998,
    "tsmTuid"      : "TSTF02S3R1AL",
    "tsmGw"        : "TSGW1234",
    "hall"         : 0,     
    "hallCount"    : 0
}]

Machine-usage mode

{
  "tsmId"          : 16100
  "tsmEv"          : 10
  "activityLevel"  : 34200, //34.2%
  "energyLevel"    : 400,   // indicative value
  "histogram0"     : 2,     // > 128mG, detected count
  "histogram1"     : 14,    // > 300mG, detected count
  "histogram2"     : 45,    // > 500mG, detected count
  "histogram3"     : 23,    // > 1G, detected count
  "histogram4"     : 2,     // > 2G, detected count
  "histogram5"     : 1,     // > 3G, detected count
  "histogram6"     : 0,     // > 4G, detected count
}

Thingsee TestLab Reference Measurements

  • temperature measurement: passed, sensor component spec
  • airpressure measurement: passed, sensor component spec
  • humidity measurememnt: passed, sensor component spec
  • ambientlight measurement: indicative values, not calibrated
  • magneto-resistive switch: operate 7 gauss, release 5 gauss
  • battery-life (interval): 4 year (1min), 8 years (15min)

Machine Usage Mode

  • measurement frequency: 50Hz
  • reporting interval: 1 minute
  • detected vibration range: 128mG - 4G
  • battery-life: 12-18 months

Factory configuration

The following parameters are configured during the manufacturing process.

  • Wirepas connectivity parameters

Remote configuration

The following parameters are configurable remotely over Thingsee Operations Cloud.

  • measurement interval
  • Wirepas head-node and sub-node configuration
  • enable/disable machine-usage-monitoring mode
  • enable/disable positioning anchor mode
This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information
firmware/thingseeenvironment_2019.04.23.1_ts_pod3wp34.txt ยท Last modified: 2019/09/06 08:09 by tmuvee