ThingseeWiki

Thingsee IoT Platform Technical Documentation

User Tools

Site Tools


firmware:thingseeenvironment_2018.08.02.1_ts_pod2

2018.08.02.1_ts_pod2

ThingseeENVIRONMENT with 2018.08.02.1_ts_pod2 is used to measure following environment parameters

  • temperature
  • humidity
  • airpressure
  • ambient light
  • hall / magneto-resistive switch status
  • sensor orientation

The device has Wirepas connectivity and requires Wirepas-enabled gateway for cloud communication.

Firmware status

CE-certified and ready for commercial use.

Upcoming main features

  • Power optimisations in asset-tracking mode.

Default functionality

  • report a temperature value every 1 minute
  • report a humidity value every 1 minute
  • report an ambientlight value every 1 minute
  • report an airpressure value every 1 minute
  • report x,y,z-axis gravity values every 1 minute
  • report battery-level information every 24 hours
  • report a count of changes in magnetic switch

Thingsee Messages

Following Thingsee Message profiles are used

  • Thingsee Message common profile (1)

    • 1100 Thing system info data
    • 1101 Thing information request
    • 1102 Thing information unavailable response
    • 1110 Thing battery info data
    • 1111 Thing orientation info
    • 1202 Sensor network neighbouring data
    • 1312 Firmware binary version info
    • 1403 Error info
    • 1500 Sensor Application Interval Configuration
    • 1501 Sensor Wirepas Node Role Configuration
  • Thingsee Message environment measurement profile (12)

    • 12100 Environment values
    • 12101 Magneto sensor status
  • Thingsee Message machine-usage-monitor profile (16)
    • 16100 vibration data

Example data as received from Thingsee Operations Cloud

Environment values

[{
    "tsmId"        : 12100,
    "tsmEv"        : 10,
    "tsmTs"        : 1492603998,
    "tsmTuid"      : "TSTF02S3R1AL",
    "tsmGw"        : "TSGW1234",
    "temp"         : 22.3,
    "humd"         : 56,
    "airp"         : 101456.34,     
    "lght"         : 76
}]

Magneto-sensor status

[{
    "tsmId"        : 12101,
    "tsmEv"        : 10,
    "tsmTs"        : 1492603998,
    "tsmTuid"      : "TSTF02S3R1AL",
    "tsmGw"        : "TSGW1234",
    "hall"         : 0,     
    "hallCount"    : 0
}]

Machine-usage mode

{
  "tsmId"          : 16100
  "tsmEv"          : 10
  "activityLevel"  : 34200, //34.2%
  "energyLevel"    : 400,   // indicative value
  "histogram0"     : 2,     // > 128mG, detected count
  "histogram1"     : 14,    // > 300mG, detected count
  "histogram2"     : 45,    // > 500mG, detected count
  "histogram3"     : 23,    // > 1G, detected count
  "histogram4"     : 2,     // > 2G, detected count
  "histogram5"     : 1,     // > 3G, detected count
  "histogram6"     : 0,     // > 4G, detected count
}

Thingsee TestLab Reference Measurements

  • temperature measurement: passed, sensor component spec
  • airpressure measurement: passed, sensor component spec
  • humidity measurememnt: passed, sensor component spec
  • ambientlight measurement: indicative values, not calibrated
  • magneto-resistive switch: operate 7 gauss, release 5 gauss
  • machine usage mode: passed, example message
  • battery-life (interval): 4 year (1min), 8 years (15min)

Factory configuration

The following parameters are configured during the manufacturing process.

  • Wirepas connectivity parameters

Remote configuration

The following parameters are configurable remotely over Thingsee Operations Cloud.

  • measurement interval
  • Wirepas head-node and sub-node configuration
  • enable/disable machine-usage-monitoring mode
  • enable/disable positioning anchor mode

Installation Notes

The device is designed to be used indoors only.

This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information
firmware/thingseeenvironment_2018.08.02.1_ts_pod2.txt ยท Last modified: 2019/05/07 10:57 by tmuvee