Differences

This shows you the differences between two versions of the page.

Link to this comparison view

firmware:2019.04.23.1_ts_pod3wp34 [2019/08/15 09:24] (current)
tmuvee created
Line 1: Line 1:
 +====== 2019.04.23.1_ts_pod3wp34 ======
  
 +ThingseeENVIRONMENT with 2018.08.02.1_ts_pod2 is used to measure following environment parameters
 +
 +  * temperature
 +  * humidity
 +  * airpressure
 +  * ambient light
 +  * hall / magneto-resistive switch status ​
 +  * sensor orientation
 +
 +The device has Wirepas connectivity and requires Wirepas-enabled gateway for cloud communication.
 +
 +===== Firmware status =====
 +
 +CE-certified and ready for commercial use.
 +
 +===== What's new =====
 +
 +  * Heart-beat support
 +  * Machine-usage-monitoring mode where data is sent only when vibration is detected
 +  * Support for water-leakage detection casing to report when water leakage is detected
 +
 +===== Default functionality =====
 +
 +  * report a temperature value every 1 minute
 +  * report a humidity value every 1 minute
 +  * report an ambient light value every 1 minute
 +  * report an air pressure value every 1 minute
 +  * report x, y, z-axis gravity values every 1 minute
 +  * report battery-level information every 24 hours
 +  * report a count of changes in magnetic switch
 +
 +===== Thingsee Messages =====
 +
 +Following Thingsee Message profiles are used
 +
 +  * Thingsee Message common profile (1)
 +    * 1100 Thing system info data
 +    * 1101 Thing information request
 +    * 1102 Thing information unavailable response
 +    * 1110 Thing battery info data
 +    * 1111 Thing orientation info
 +    * 1202 Sensor network neighboring data
 +    * 1312 Firmware binary version info
 +    * 1403 Error info
 +    * 1500 Sensor Application Interval Configuration
 +    * 1501 Sensor Wirepas Node Role Configuration
 +  * Thingsee Message environment measurement profile (12)
 +    * 12100 Environment values
 +    * 12101 Magneto sensor status
 +  * Thingsee Message machine-usage-monitor profile (16)
 +    * 16100 vibration data
 +
 +==== Example data as received from Thingsee Operations Cloud ====
 +
 +=== Environment values === 
 +
 +<​code>​
 +[{
 +    "​tsmId" ​       : 12100,
 +    "​tsmEv" ​       : 10,
 +    "​tsmTs" ​       : 1492603998,
 +    "​tsmTuid" ​     : "​TSTF02S3R1AL",​
 +    "​tsmGw" ​       : "​TSGW1234",​
 +    "​temp" ​        : 22.3,
 +    "​humd" ​        : 56,
 +    "​airp" ​        : 101456.34, ​    
 +    "​lght" ​        : 76
 +}]
 +</​code>​
 +
 +=== Magneto-sensor status === 
 +
 +<​code>​
 +[{
 +    "​tsmId" ​       : 12101,
 +    "​tsmEv" ​       : 10,
 +    "​tsmTs" ​       : 1492603998,
 +    "​tsmTuid" ​     : "​TSTF02S3R1AL",​
 +    "​tsmGw" ​       : "​TSGW1234",​
 +    "​hall" ​        : 0,     
 +    "​hallCount" ​   : 0
 +}]
 +</​code>​
 +
 +=== Machine-usage mode ===
 +
 +<​code>​
 +{
 +  "​tsmId" ​         : 16100
 +  "​tsmEv" ​         : 10
 +  "​activityLevel" ​ : 34200, //34.2%
 +  "​energyLevel" ​   : 400,   // indicative value
 +  "​histogram0" ​    : 2,     // > 128mG, detected count
 +  "​histogram1" ​    : 14,    // > 300mG, detected count
 +  "​histogram2" ​    : 45,    // > 500mG, detected count
 +  "​histogram3" ​    : 23,    // > 1G, detected count
 +  "​histogram4" ​    : 2,     // > 2G, detected count
 +  "​histogram5" ​    : 1,     // > 3G, detected count
 +  "​histogram6" ​    : 0,     // > 4G, detected count
 +}
 +</​code>​
 +
 +===== Thingsee TestLab Reference Measurements =====
 +
 +  * **temperature measurement:​** passed, sensor component spec
 +  * **airpressure measurement:​** passed, sensor component spec
 +  * **humidity measurememnt:​** passed, sensor component spec
 +  * **ambientlight measurement:​** indicative values, not calibrated
 +  * **magneto-resistive switch:** operate 7 gauss, release 5 gauss
 +  * **machine usage mode:** passed, example message
 +  * **battery-life (interval):​** 4 year (1min), 8 years (15min)
 +
 +{{:​thingseeenvironment_firmware_specification:​pod_measurements.png?​direct&​600|}}
 +
 +===== Factory configuration =====
 +
 +The following parameters are configured during the manufacturing process.
 +
 +  * Wirepas connectivity parameters
 +
 +===== Remote configuration =====
 +
 +The following parameters are configurable remotely over Thingsee Operations Cloud.
 +
 +  * measurement interval
 +  * Wirepas head-node and sub-node configuration
 +  * enable/​disable machine-usage-monitoring mode
 +  * enable/​disable positioning anchor mode
 +
 +===== Installation Notes =====
 +
 +The device is designed to be used indoors only.